This paper provides a review of cellulose, sources, extraction, molecular structure, cellulose whiskers, preparations, and morphology. The mechanical and thermal properties of cellulose reinforced composites are also discussed. Detail structure of Nano whiskers is also reported. As a renewable biomaterial, the most common source of cellulose is the plant. These plants include fruit fibers (coir), seed fibers (cotton), wood, leaf fibers (sisal), bast fibers (jute, kenaf, and hemp). Other sources of cellulose are from microorganisms such as fungi, tunicates, bacteria, and algae. Cellulose whiskers are isolated from cellulose fibers by acid hydrolysis. Cellulose micro fibril structures are made of both amorphous and crystalline regions. The amorphous regions are vulnerable to hydrolysis by acids compared to the crystalline domains. Several techniques among which are Field Emission Scanning Electron Microscopy (FESEM), Transmission electron microscopy (TEM) and Atomic Force Microscopy (AFM) have been used to study the morphology of cellulose whiskers. An interface between cellulose whisker and matrix is a transition zone between the matrix and the cellulose whiskers. It plays an important role in the overall mechanical properties of the composites. A soft interface domain will yield a greater resistance to fracture, while the composite will be low in stiffness and strength. On the other hand, a stiffer interface domain may cause the composite to be strong and stiff and less resistant to fracture. The addition of CW into polymers matrices has little or no effect on the glass transition temperature, (Tg) except on the modification of CW.