Polymers

Matrix coils are based on Gugliemi detachable coils (GDC) but are covered with polyglycolic/polylactic acid. We present our experience regarding the immediate posttreatment results of aneurysm embolization using the 2 coil systems. We embolized 219 aneurysms in 187 patients with the use of GDCs and 145 aneurysms in 120 patients with the use of Matrix coils. Age, sex distribution, unruptured aneurysm cases, and multiple aneurysm cases were similar in the 2 groups. The percentage of patients in severe clinical condition was significantly higher in the Matrix group. The mean aneurysm size was slightly larger in the GDC group but the mean neck size was larger in the Matrix group. Satisfactory occlusion (at least 90%) was achieved in 95.9% of GDC-treated aneurysms and in 98.6% of Matrix-treated aneurysms. Procedure-related complications occurred in 19.6% of GDC procedures and in 15.6% of the Matrix ones resulting in procedure-related mortality and morbidity of 3.7% and 2.7% for the GDC g...

Electrically-conducting polymers (CPs) were first developed as a revolutionary class of organic compounds that possess optical and electrical properties comparable to that of metals as well as inorganic semiconductors and display the commendable properties correlated with traditional polymers, like the ease of manufacture along with resilience in processing. Polymer nanocomposites are designed and manufactured to ensure excellent promising properties for anti-static (electrically conducting), anti-corrosion, actuators, sensors, shape memory alloys, biomedical, flexible electronics, solar cells, fuel cells, supercapacitors, LEDs, and adhesive applications with desired-appealing and cost-effective, functional surface coatings. The distinctive properties of nanocomposite materials involve significantly improved mechanical characteristics, barrier-properties, weight-reduction, and increased, long-lasting performance in terms of heat, wear, and scratch-resistant. Constraint in availabili...

Despite remarkable developments in vascular medicine in the last decades and intensive research on the improvement of bypass materials, an ideal bypass graft comparable to autologous veins or arteries is still not available for peripheral vascular and coronary artery bypass grafting. This article reviews established bypass materials and provides an overview over interesting new technologies particularly those associated with tissue-engineering and those already adopted clinically.

Standard fused filament fabrication (FFF)-based 3-D printers fabricate parts from thermopolymers, such as polylactic acid (PLA). A new range of metal based PLA composites are available providing a novel range of potential engineering materials for such 3-D printers. Currently, limited material data, specifically thermal property characterization is available on these composites. As a result, the application of these materials into functional engineered systems is not possible. This study aims to fill the knowledge gap by quantifying the thermal properties of copperFill, bronzeFill, magnetic iron PLA, and stainless steel PLA composites and provide insight into the technical considerations of FFF composite 3-D printing. Specifically, in this study the correlation of the composite microstructure and printing parameters are explored and the results of thermal conductivity analysis as a function of printed matrix properties are provided. Considering the relative deviation from the filament raw bulk analysis, the results show the printing operation significantly impacts the resultant component density. Experimentally collected thermal conductivity values, however, do not correlate to the theoretical models in the literature and more rigorous quantitative exercises are required to determine true percent porosity to accurately model the effect of air pore volume fraction on thermal conductivity. Despite this limitation, the thermal conductivity values provided can be used to engineer thermal conductivity into 3-D printed parts with these PLA-based composites. Finally, several high-value applications of such 3-D printed materials that look metallic, but have low thermal conductivity are reviewed.

In order to assist researchers explore the full potential of distributed recycling of post-consumer polymer waste, this article describes a recyclebot, which is a waste plastic extruder capable of making commercial quality 3-D printing filament. The device design takes advantage of both the open source hardware methodology and the paradigm developed by the open source self-replicating rapid prototyper (RepRap) 3-D printer community. Specifically, this paper describes the design, fabrication and operation of a RepRapable Recyclebot, which refers to the Recyclebot's ability to provide the filament needed to largely replicate the parts for the Recyclebot on any type of RepRap 3-D printer. The device costs less than $700 in mate rials and can be fabricated in about 24 h. Filament is produced at 0.4 kg/h using 0.24 kWh/kg with a diameter ±4.6%. Thus, filament can be manufactured from commercial pellets for <22% of commercial filament costs. In addition, it can fabricate recycled waste plastic into filament for 2.5 cents/kg, which is <1000X commercial filament costs. The system can fabricate filament from polymers with extrusion temperatures <250 °C and is thus capable of manufacturing custom filament over a wide range of thermopolymers and composites for material science studies of new materials and recyclability studies, as well as research on novel applications of fused filament based 3-D printing.

The present study is a focused and comprehensive analysis of the dielectric and thermal properties of twenty-four 3D printed polymers suitable for fused filament fabrication (FFF) in electronic applications. The selected polymers include various thermoplastic elastomers, such as thermoplastics based on polycarbonate (PC), polyethylene terephthalate glycol (PETG), and acrylonitrile butadiene styrene (ABS-T). Their overall thermal behavior, including oxidation stability, glass transition, and melting temperature, was explored using simultaneous thermal analysis (STA) and differential scanning calorimetry (DSC). Considering their intended usage in electronic applications, the dielectric strength (Ep) and surface/volume resistivity (ρs/ρv) were comprehensively tested according to IEC 60243-1 and IEC 62631-3, respectively. The values of the dielectric constant (ε’) and loss factor (ε”) were also determined by broadband dielectric spectroscopy (BDS). While, on the one hand, exceptional di...

As one of the fastest-growing additive manufacturing (AM) technologies, fused deposition modelling (FDM) shows great potential in printing natural fibre-reinforced composites (NFRC). However, several challenges, such as low mechanical properties and difficulty in printing, need to be overcome. Therefore, the effort to improve the NFRC for use in AM has been accelerating in recent years. This review attempts to summarise the current approaches of using NFRC as a feeder for AM. The effects of fibre treatments, composite preparation methods and addition of compatibilizer agents were analysed and discussed. Additionally, current methods of producing feeders from NFRCs were reviewed and discussed. Mechanical property of printed part was also dependent on the printing parameters, and thus the effects of printing temperature, layer height, infill and raster angle were discussed, and the best parameters reported by other researchers were identified. Following that, an overview of the mechan...

Resveratrol is a natural molecule with antioxidant action. Moreover, resveratrol is also considered to be a molecule with anti-inflammatory action, an effect attributed to suppression of prostaglandin (PG) biosynthesis. The aim of the present study was to investigate the effects of resveratrol, a polyphenol present in most red wines, on reactive oxygen species formation as well as on arachidonic acid (AA) release, cyclooxygenase expression, and PG synthesis in murine resident peritoneal macrophages. Results show that resveratrol exerted a strong inhibitory effect on superoxide radical (O2−) and hydrogen peroxide (H2O2) produced by macrophages stimulated by lipopolysaccharides (LPS) or phorbol esters (PMA). Resveratrol also significantly decreased [3H]AA release induced by LPS and PMA or by exposure to O2− or H2O2. Resveratrol treatment caused a significant impairment of cyclooxygenase-2 (COX-2) induction stimulated by LPS and PMA or by O2− or H2O2 exposure. These effects of resveratrol on [3H]AA release and COX-2 overexpression were correlated with a marked reduction of PG synthesis. Our results indicate that the antioxidant action of resveratrol affects AA mobilization and COX-2 induction.

The Present work includes, degradation of polyethylene under different environmental conditions to know the effect of physical, chemical and biological factors prevailing in those conditions on degradation of polyethylene. Plastic films viz., Low density polyethylene (LDPE), High density polyethylene (HDPE) and High molecular weight high density polyethylene (HMHDPE) each were incubated in three different conditions viz., black soil, sandy soil and red soil for a period of 3 months. The changes in the properties of plastic films after incubation was studied by change in the weight of the plastic film and mechanical parameters like tensile strength, breaking load and percentage of elongation. Among all the plastic films HDPE was found to be highly susceptible with 33% weight loss and 40% reduction in percentage of elongation compared to LDPE with 26% weight loss and 34 % reduction in percentage of elongation in black soil. Whereas HMHDPE found to be highly resistant in all the soils with no significant weight loss and percentage of elongation (15%). None of the plastic films had shown degradation in sandy soil even after incubation for 3 months. FTIR spectroscopy results showed that HDPE film incubated in black soil had undergone extensive degradation when compared with un incubated HDPE film.

The most frequent diseases of the urinary bladder are bacterial infections and bladder cancers. For both diseases, very high recurrence rates are characteristic: 50–80% for bladder cancer and more than 50% for bladder infections, causing loss of millions of dollars per year for medical treatment and sick leave. Despite years of searching for better treatment, the prevalence of bladder infections and bladder cancer remains unchanged and is even increasing in recent years. Very encouraging results in treatment of both diseases recently culminated from studies combining biopolymer chitosan with immunotherapy, and chitosan with antibiotics for treatment of bladder cancer and cystitis, respectably. In both pathways of research, the discoveries involving chitosan reached a successful long-lasting cure. The property of chitosan that boosted the effectivity of illness-specific drugs is its ability to enhance the accessibility of these drugs to the very sources of both pathologies that indiv...

A novel bioinspired molecule, 1,3-bis(vinylbenzyl)thymine (bisVBT), was isolated as a by-product during the synthesis of 1-(4-vinylbenzyl)thymine (VBT) and analyzed with various techniques: NMR, IR, and Single-Crystal X-ray Diffraction. In addition to embodying all the desired characteristics of VBT (i.e., having the ability to undergo a 2π+2π photodimerization reaction upon UV irradiation, a derivatization site, hydrogen bonding sites, and aromatic stacking ability) the bisVBT monomer has the added benefit of having two vinyl groups for cross-polymerization. Copolymerizing the bisVBT monomer with the charged monomer vinylbenzyl triethylammonium (VBA) chloride, different copolymers/terpolymers/cross-linked network were obtained, as it was shown by the absence of the vinyl resonance in the NMR spectra. Thermal Gravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) showed an indication of materials with low degree of cross-linking. A Gel Permeation Chromatography (GPC)...

PMMA beam specimens were tested in four-point bending to determine if&#x27; the bending strength of acrylic bone cement, as used in posterior spinal fusion, could be improved by metal-wire reinforcement. The result showed that the load-carrying capacities of 1-and 0.5-mm diam ...

The propagation of a light beam through a photo-sensitive photopolymer Polyvinyl Alcohol/Acrylamide (PVA/AA), and the creation of self-written waveguides (SWWs), has received much attention. Here we explore the manufacture and characterization of SWWs in PVA/AA for applications at near infrared communication wavelengths 850nm and 1300nm. The SWWs are fabricated using visible light at wavelength 532nm. The insertion and optical loss of the SWWs at different wavelengths will be interrogated. An optical loss and attenuation profile is to be built up for each of the three wavelengths as they propagate down the resulting SWWs.

This paper presents state-of-the-art micro and nano-fabrication techniques for biodegradable polymers. Replication molding, using a rigid or elastic master, can pattern structures on a polymer surface in a submicron resolution at a low cost. Layer-by-layer rapid prototyping methods are promising in producing controlled release units with complicated geometries, release mechanisms and the ability to control microstructure and composition. Special attention is paid to the fast, flexible, and non-invasive laser fabrication techniques that have great potential in the fabrication of biodegradable polymer drug delivery devices in both a laboratory and industry scale.

Surface-coated cardiopulmonary bypass (CPB) has been shown to have excellent biocompatibility during cardiac surgery in adults, but there have been only a few reports demonstrating the efficacy of this coating for congenital cardiac surgery. We tested the efficacy of poly-2-methoxyethylacrylate (PMEA) coating for CPB circuits in congenital cardiac surgery. Eleven operative cases of ventricular septal defect were studied: group C (control: no coating, n = 5) and group P (PMEA coating, n = 6). The platelet count and beta-thromboglobulin (beta TG), fibrinogen (FBG), thrombin-antithrombin complex (TAT), and neutrophil elastase levels were measured during the operation. Postoperative chest tube drainage was analyzed and the surface of the artificial lung was observed with an electron microscope. Elevation of TAT and neutrophil elastase was suppressed in group P (P &lt; 0.05). Observation of the artificial lung surface using an electron microscope clearly revealed fewer blood cells were a...

Polymeric materials have been used by painting conservator-restorers as consolidants and/or varnishes for wall paintings. The application of these materials is carried out when confronting loose paint layers or as a protective coating. However, these materials deteriorate and cause physiochemical alterations to the treated surface. In the past, the monumental neo-gothic wall painting ‘The Last Judgment’ in the chapel of Sint-Jan Berchmanscollege in Antwerp, Belgium was treated with a synthetic polymeric material. This varnish deteriorated significantly and turned brown, obscuring the paint layers. Given also that the varnish was applied to some parts of the wall painting and did not cover the entire surface, it was necessary to remove it in order to restore the original appearance of the wall painting. Previous attempts carried out by conservator-restorers made use of traditional cleaning methods, which led to damage of the fragile paint layers. Therefore, gel cleaning was proposed ...

Metastasis is a dynamic process involving the dissemination of circulating tumor cells (CTCs) through blood flow to distant tissues within the body. Nevertheless, the development of an in vitro platform that dissects the crucial steps of metastatic cascade still remains a challenge. We here developed an in vitro model of extravasation composed of (i) a single channel-based 3D cell laden hydrogel representative of the metastatic site, (ii) a circulation system recapitulating the bloodstream where CTCs can flow. Two polymers (i.e., fibrin and alginate) were tested and compared in terms of mechanical and biochemical proprieties. Computational fluid-dynamic (CFD) simulations were also performed to predict the fluid dynamics within the polymeric matrix and, consequently, the optimal culture conditions. Next, once the platform was validated through perfusion tests by fluidically connecting the hydrogels with the external circuit, highly metastatic breast cancer cells (MDA-MB-231) were inj...

Graphene has attracted great interest for its superior physical, chemical, mechanical, and electrical properties that enable a wide range of applications from electronics to nanoelectromechanical systems. Functionalization is among the significant vectors that drive graphene towards technological applications. While the physical properties of graphene have been at the center of attention, we still lack the knowledge framework for targeted graphene functionalization. In this critical review, we describe some of the important ...

The development of anilinium 2-acrylamide-2-methyl-1-propanesulfonate (Ani-AMPS) monomer, confirmed by 1H NMR, 13C NMR, and FTIR, is systematically studied. Ani-AMPS contains two polymerizable functional groups, so it was submitted to selective polymerization either by free-radical or oxidative polymerization. Therefore, poly(anilinium 2-acrylamide-2-methyl-1-propanesulfonic) [Poly(Ani-AMPS)] and polyaniline doped with 2-acrylamide-2-methyl-1-propanesulfonic acid [PAni-AMPS] can be obtained. First, the acrylamide polymer, poly(Ani-AMPS), favored the π-stacking of the anilinium group produced by the inter- and intra-molecular interactions and was studied utilizing 1H NMR, 13C NMR, FTIR, and UV-Vis-NIR. Furthermore, poly(Ani-AMPS) fluorescence shows quenching in the presence of Fe2+ and Fe3+ in the emission spectrum at 347 nm. In contrast, the typical behavior of polyaniline is observed in the cyclic voltammetry analysis for PAni-AMPS. The optical properties also show a significant ch...

Polypropylene (PP) fibers are employed commonly as the raw material of technical textiles (nonwovens), and the research focuses on fine-denier fibers and their functionalities. In this work, antibacterial PP masterbatches with different dosage (1–5 wt.%) of nano-ZnO particles as the antibacterial agent were prepared via a twin-screw extruder. The as-prepared PP masterbatches were electrospun on a home-made electrospinning device to afford ultra-fine PP fibers. The morphologies of as-spun ultrathin PP fibers with 16 μm of average diameter were observed by SEM. The structure and element distribution were characterized by means of energy-dispersive spectroscopy (EDS) and Fourier-transfer infrared spectroscopy (FTIR), respectively. There was some zinc obviously distributed on the surface when a dosage of ZnO more than 1 wt.% was used, which contributed to the antibacterial activity. The crystallinity of PP fibers was not affected strongly by the dosage of ZnO based on the differential s...